DMM Rhino Locksafe Karabiner

RRP is £25.19 (Inc VAT)

£16.80 (Inc VAT)

Saving of £8.39

Price £16.80 (Inc VAT) Stock: In Stock Quantity
Add To Wish List

DMM Rhino Locksafe Karabiner Description

After observing how sport climbers were modifying their belay biners with rubber bungs to prevent cross-loading with certain belay devices, we came up with a cleaner, simple, solution. The horn prevents assisted locking belay devices rotating off the top bar and on to the spine reducing the risk of cross loading, it also works well with selected DMM pulleys. The Rhino is not restricted to assisted locking belay devices: it works brilliantly with standard devices. The full cross section of the top bar means greater wear resistance, and smooth operation in guide mode usage. The horn makes identification by feel on the rear gear loop easier, and the clean nose design provides snag-free loading and unloading of ropes. The big burly top bar is contrasted by our signature I-Beam construction on the non-rope bearing surfaces resulting in a total weight of 72g.

DMM Rhino Locksafe Karabiner Features

  • Approved to EN 362:2004/B and EN 12275:2013
  • Horn feature reduces the risk of cross loading
  • Wide, full radius basket provides a rope and device friendly operation
  • I-Beam construction for high strength and low weight
  • Keylock clean nose for snag free connection
  • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
  • Uniquely marked for traceability

DMM Rhino Locksafe Karabiner Arrange a Consultation

Please fill in your details below and we will contact you as soon as possible to discuss this machine. Please note, due to the size of this machine, we can only deliver it within a certain radius of our branches, so we will discuss this with you. 

Please tell us whereabouts you are based so we can get the relevant branch in touch with you. We have branches based in Winchester(SO22), Liss(GU33) and Sunningdale(GU20). We can only sell this item within a certain radius of our branches.

After observing how sport climbers were modifying their belay biners with rubber bungs to prevent cross-loading with certain belay devices, we came up with a cleaner, simple, solution. The horn prevents assisted locking belay devices rotating off the top bar and on to the spine reducing the risk of cross loading, it also works well with selected DMM pulleys. The Rhino is not restricted to assisted locking belay devices: it works brilliantly with standard devices. The full cross section of the top bar means greater wear resistance, and smooth operation in guide mode usage. The horn makes identification by feel on the rear gear loop easier, and the clean nose design provides snag-free loading and unloading of ropes. The big burly top bar is contrasted by our signature I-Beam construction on the non-rope bearing surfaces resulting in a total weight of 72g.

  • Approved to EN 362:2004/B and EN 12275:2013
  • Horn feature reduces the risk of cross loading
  • Wide, full radius basket provides a rope and device friendly operation
  • I-Beam construction for high strength and low weight
  • Keylock clean nose for snag free connection
  • Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
  • Uniquely marked for traceability