The Stihl MS150 TC-E 10" Chainsaw is a very lightweight, ergonomic Top Handle chainsaw ideal for pruning, hedgelaying and removing small limbs. It can also be used with a carving bar for for intricate woodwork. Reliable and easy to start thanks to a manual fuel pump and Ergo Start technology and uses a 1/4" chain and 2-MIX Engine.
Bar Length - 10" (25cm)
Displacement - 23.6cc
Power Output - 1.0kW/1.3hp
Weight - 2.6kg
Saw Chain pitch/thickness - 1/4", 1.1mm
Warranty - 2 Years
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Advanced combustion technology - Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Compensator - This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Service-friendly air filter system - The carburetor can be accessed without tools, so you can clean the air filter in a single step.
Manual fuel pump (Purger) - A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Anti-vibration system - Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
Ematic chain lubrication system - The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
STIHL ErgoStart (E) - A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
Single-lever master control - All important functions such as start, choke, throttle and stop are operated via a single lever.
Side chain tensioner - The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Tool free filler caps - Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
Oregon file kit for your chainsaw, featuring all tools and instruction manual for keeping the chain sharp.
TopSaw pocket tool, an all-in-one chainsaw tool and tensioner in a compact design and carry case.