Toro Dingo TX 427 Narrow Track Loader (22321)

RRP is £30,420.00 (Inc VAT)

£27,378.00 (Inc VAT)

Saving of £3,042.00

Price: £27,378.00 (Inc VAT)
Stock: Out Of Stock

Toro Dingo TX 427 Narrow Track Loader (22321) Description

The Toro Dingo® TX 427 Track Loader, Narrow is a compact utility loader that is built for tough jobs in tight spaces. Its narrow track design allows it to maneuver easily through gates and doorways, while its powerful engine and hydraulic system provide the muscle to get the job done. The TX 427 is also highly versatile, with a wide range of attachments available to handle everything from digging and trenching to landscaping and snow removal.

Whether you're a contractor, landscaper, or homeowner, the Toro Dingo® TX 427 Track Loader, Narrow is a powerful and versatile tool that can help you get the job done right.

Toro Dingo TX 427 Narrow Track Loader (22321) Features

Low-Impact Footprint - Long-lasting, aramid reinforced tracks disperse weight evenly for a light footprint on tur, while delivering better traction in sandy or wet ground conditions.

4-Pump Hydraulic System - 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

Exclusive TX Controls - Three simple controls let operators get to work fast: 1 Curl, dump or float the bucket while raising or lowering the loader arms with one hand using the joystick. 2 Grab the one-handed traction drive from any angle for effortless control. 3 Activate the auxiliary circuit control lever to power the attachments instantly.

Air-Cooled Gasoline Engine - A 27 hp (20 kw) Kohler® engine provides the necessary power to drive any one of the multitude of Toro attachments available for the Dingo TX.

Exclusive TX Track Drive - Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires.

Compact Size - Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.

 

Toro Dingo TX 427 Narrow Track Loader (22321) Specification

Model - TX 427 Narrow Track - 22321

Engine - Kohler Command Pro 25hp (18.6 kW)

Air Filter - Two-stage, Heavy Duty, remote

Cooling System - Air Cooled

Fuel Tank - 23L

Oil Capacity - 2.95L

Hydraulic Pressure - 3,000 PSI

Hydraulic Flow - Traction: 16.9 gpm (each pump) - Auxiliary: 11.4 gpm

Reservoir Capacity - 37.8L

Tracks Standard - Sprocket-drive, 10 road wheels per side

Traction - Dual hydrostatic pump

Track Dimensions - 96.6" x 5.9" (245.3 cm x 14.9 cm)

Wheelbase - 31.2" (79.2cm)

Ground Clearance - 4.6" (11.6cm)

Overall Dimensions (WxLxH) with Bucket - 33.7" x 92" x 46.1" (85.5 x 233.6 x 117.0 cm)

Overall Dimensions (WxLxH) without Bucket - 33.7" x 70.7" x 46.1" (86.5 x 179.5 x 117.0 cm)

Maximum Operating Height - 90.1" (228.8cm)

Hinge Pin Height - 65.8" (167.1cm)

Dump Height - 46.1" (117cm)

Dump Angle - 38-degrees

Reach - Fully Raised - 21.8" (55.3cm)

Foward Ground Speed - 0-4.5mph (0-7.2km/h)

Reverse Ground Speed - 0-2.0mph (0-3.2km/h)

Weight - 853.6kg

Tip Capacity - 693.9kg

Rated Operating Capacity (35% of Tip Capacity) - 242.6kg

Ground Pressure - 5.1 PSI

Toro Dingo TX 427 Narrow Track Loader (22321) Arrange a Consultation

Please fill in your details below and we will contact you as soon as possible to discuss this machine. Please note, due to the size of this machine, we can only deliver it within a certain radius of our branches, so we will discuss this with you. 

Please tell us whereabouts you are based so we can get the relevant branch in touch with you. We have branches based in Winchester(SO22), Liss(GU33) and Sunningdale(GU20). We can only sell this item within a certain radius of our branches.

Toro Dingo TX 427 Narrow Track Loader (22321) Delivery Information

All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.

We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.

  • GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
  • AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £200 delivery charge

For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.

The Toro Dingo® TX 427 Track Loader, Narrow is a compact utility loader that is built for tough jobs in tight spaces. Its narrow track design allows it to maneuver easily through gates and doorways, while its powerful engine and hydraulic system provide the muscle to get the job done. The TX 427 is also highly versatile, with a wide range of attachments available to handle everything from digging and trenching to landscaping and snow removal.

Whether you're a contractor, landscaper, or homeowner, the Toro Dingo® TX 427 Track Loader, Narrow is a powerful and versatile tool that can help you get the job done right.

Low-Impact Footprint - Long-lasting, aramid reinforced tracks disperse weight evenly for a light footprint on tur, while delivering better traction in sandy or wet ground conditions.

4-Pump Hydraulic System - 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

Exclusive TX Controls - Three simple controls let operators get to work fast: 1 Curl, dump or float the bucket while raising or lowering the loader arms with one hand using the joystick. 2 Grab the one-handed traction drive from any angle for effortless control. 3 Activate the auxiliary circuit control lever to power the attachments instantly.

Air-Cooled Gasoline Engine - A 27 hp (20 kw) Kohler® engine provides the necessary power to drive any one of the multitude of Toro attachments available for the Dingo TX.

Exclusive TX Track Drive - Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires.

Compact Size - Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.

 

Model - TX 427 Narrow Track - 22321

Engine - Kohler Command Pro 25hp (18.6 kW)

Air Filter - Two-stage, Heavy Duty, remote

Cooling System - Air Cooled

Fuel Tank - 23L

Oil Capacity - 2.95L

Hydraulic Pressure - 3,000 PSI

Hydraulic Flow - Traction: 16.9 gpm (each pump) - Auxiliary: 11.4 gpm

Reservoir Capacity - 37.8L

Tracks Standard - Sprocket-drive, 10 road wheels per side

Traction - Dual hydrostatic pump

Track Dimensions - 96.6" x 5.9" (245.3 cm x 14.9 cm)

Wheelbase - 31.2" (79.2cm)

Ground Clearance - 4.6" (11.6cm)

Overall Dimensions (WxLxH) with Bucket - 33.7" x 92" x 46.1" (85.5 x 233.6 x 117.0 cm)

Overall Dimensions (WxLxH) without Bucket - 33.7" x 70.7" x 46.1" (86.5 x 179.5 x 117.0 cm)

Maximum Operating Height - 90.1" (228.8cm)

Hinge Pin Height - 65.8" (167.1cm)

Dump Height - 46.1" (117cm)

Dump Angle - 38-degrees

Reach - Fully Raised - 21.8" (55.3cm)

Foward Ground Speed - 0-4.5mph (0-7.2km/h)

Reverse Ground Speed - 0-2.0mph (0-3.2km/h)

Weight - 853.6kg

Tip Capacity - 693.9kg

Rated Operating Capacity (35% of Tip Capacity) - 242.6kg

Ground Pressure - 5.1 PSI

Toro Dingo TX 427 Narrow Track Loader (22321) Delivery Information

All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.

We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.

  • GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
  • AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £200 delivery charge

For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.